Aktiveeritud alumiiniumoksiid

Toote tutvustus:

Aktiveeritud alumiiniumoksiidi, mida nimetatakse ka aktiveeritud alumiiniumoksiidiks, kasutatakse kuivatusainena, adsorbendina, katalüsaatorikandjana, veepuhastuses de-fluorimisel, kloriidide eemaldamisel, claus-katalüsaatorina ja muul viisil. Sellel on kõrge poorne struktuur, suur pindala, kõrge selektiivsus, kõrge imamiskiirus jne.

Chemical Formula: Al2O3• nH2O

Xiangrun and Bairui produce high quality activated alumina and alumina adsorbent with warranty. We devoted ourselves to alumina industry several years, covering Europe, America, Asia's market. We are expecting to become your long-term partner in China.

Rakendus

●-Dehydration of gas and liquid streams

●-Sulfur recovery via Claus catalyst

●-Catalyst carriers

●-Selective adsorption and purification of hydrocarbons streams

●Compressed air drying

●Natural gas drying

●Removal of acids from transformer oils, lubricating oils, and refrigerants

●-Purification of industrial gases

●-LCD adsorbents.

●H2S and SO2 removal

●-Chromatographic separation

●-Bed support

Toote selgitus:

●-Available in powder, granular, and spherical forms in standard and custom sizes

●-Impressive range of adsorbent products including desiccant, chloride adsorbent, and Claus Catalysts

●-pseudoboehmite, Boehmite and boehmite-based gamma alumina powders for chemical catalysts, catalyst binders and abrasives

ToodeTehniline parameeter

  Aktiveeritud alumiiniumoksiidi regenereerimine

●In the drying cycle, regeneration of active alumina is necessary. The heating and desorption processes include heating, rinsing and cooling in three steps. The higher the heating temperature, the more complete the desorption regeneration. General heating regeneration temperature is about 350 degree . The temperature of the alumina tower is generally raised to 280 degree for 4 hours. Heating rate of about 50 degree per hour. After the regeneration of the active alumina bed must be cooled before the adsorption operation, with the cooling gas to wash the bed, the gas should also be used to try not to contain water, cold gas flow and adsorption cycle of the same direction. When alumina bead is used for liquids such as propylene drying, it is necessary to first drive the liquid of the alumina bed at the time of regeneration, without any dead ends. Otherwise the residual liquid will react or carbonize upon heating, which will seriously affect the efficiency and operating life of the adsorption cycle.

●If the active aluminium oxide has good quality, it will improve its life. Certainly, whatever bad or good, you should use desiccant regeneration for future application. But Good quality performance could improve the life and drying situation. So please purchase aluminium oxide from standard activated alumina factory. Trust our company could offer you the best warranty.

Professionaalsed tehnilised ettepanekud:

●The specialists of our company can design the technical offer with recommendations of application adsorptive drying systems and purification of gas and-liquid flows.

●Designing of adsorption system;

●Calculations of needed quantity of adsorbents ,catalyst and alumina balls ;

●Selection of cycle time ;

●Recommendations on regeneration and cooling of the adsorbent;

●Filling instruction of adsorbents ,catalyst and alumina balls

●Technical guaranties on adsorbent operation.

Kohaletoimetamine, pakkimine, saatmine ja serveerimine:

●2-7 working days since payment receipt

●25kg/plastic bag, 150kg/new steel drum, 25kg/paper drum, 500kg/750kg/jumbo bag. The all could add wooden pallets, non-fumigation pallets and plastic pallets as your requirement.

KKK:

Q: Do you have professional team for our special active alumina to satisfy our data requirement? 

A: Our engineer and technical team includes 8 people to research and develop activated alumina. Until now, we don't confront any trouble on the data. 

K: Kui pikk on kasutusiga?

V: Tavaliselt on see vähemalt 2 aastat või 8000 tundi. Meie kogemuse kohaselt pole 5 aastat meie jaoks probleem.

K: Kuidas säilitada alumiiniumoksiidi? 

A: Firstly, Avoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied. Then it should be stored in dry and ventilated warehouse to prevent contamination or moisture. 

K: Kas aktiivset alumiiniumoksiidi saab regenereerida? 

V: Jah, seda saab taastada õige meetodiga. Lisateabe saamiseks võite meiega ühendust võtta.

Viimased uudised:Zibo Xiangrun ja Shandong Bairui uurisid 2017. aasta novembris edukalt uut väävli adsorbenti. Sellel on kõrge väävli adsorbeerimisvõime ja see võtab kasutusele uue tehnoloogia. Täpsema teabe saamiseks võtke ühendust meie meeskonnaga.

Kuum tags: aktiveeritud alumiiniumoksiid, tarnijad, tootjad, omadused, hind, eluiga, kasutusalad, pulber, tüübid, tootmine, regenereerimine, ost, ohutuskaart, HS-kood